GEAR LEVER STD R/H CHANGE COMMANDO AND EARLIER BIKES WITH AMC SPLINE

UK FORGED, FULLY MACHINED, POLISHED AND HEAVILY CHROME PLATED.  FULLY ASSEMBLED WITH RUBBER, STAINLESS PINCH BOLT, SELF LOCKING NUT AND WASHER.  USED ON ALL RIGHT HAND CHANGE COMMANDOES (THE LEFT HAND CHANGE COMMANDO IS AN ALLOY LEVER AND A SLIGHTLY DIFFERENT SHAPE ALTHOUGH THE SPLINE IS THE SAME) ALSO USED ON PRE COMMANDO NORTONS WITH THE AMC GEARBOX TYPICALLY LATE FIFTIES ONWARDS (EASY TO TELL IF YOUR GEARBOX IS AMC - THE INSPECTION COVER IS ROUND AND HELD ON WITH TWO SCREWS).  THIS LEVER WOULD OF COURSE ALSO BE SUITABLE FOR AJS, MATCHLESS AND OTHER AMC MACHINES.  SPLINE HAS 36 SERRATIONS AND FITS A SHAFT WITH A MAJOR DIAMETER OF APPROXIMATELY 5/8" (15.7MM).

OFFSET (DISTANCE FROM THE BACK OF THE FOOT PIN TO THE BACK OF THE SPLINED BOSS: 1 1/2" (40MM)
LENGTH (CENTRE OF SPLINE TO CENTRE OF FOOT PIN) APPROXIMATELY: 4.9" (125MM)

WE ALSO SUPPLY THIS LEVER BARE IN A FULLY MACHINED BUT RAW STATE ON PART NUMBER 061499RB

WE ALSO OFFER TWO DIFFERENT VERSIONS FOR RACING/CAFE RACERS WHEN THE LEVER IS REVERSED ie; FITTED FACING BACKWARDS.

PLEASE SEE PART NUMBERS 063944, 065848 AND 065848RB