FRONT ISOLASTIC RUBBERS, MK3 (ADJUSTABLE)

FRONT ISOLASTIC RUBBERS, MK3 (ADJUSTABLE)

STEEL TUBE INTERNAL DIAMETER: 0.525" (13.4MM) NOMINAL.  (CLEARANCE FOR 1/2" THROUGH BOLT OR STUD).
EXTERNAL DIAMETER: 3/4" (19MM)

ALSO SEE RGM063971

OUR VERNIER ISOLASTIC RUBBERS 066125 AND 066126 HAVE BEEN SPECIFICALLY DESIGNED TO MAINTAIN EXCELLENT HANDLING WHILST ENSURING THE MOTORCYCLE IS VIBRATION FREE.
I THINK WE HAVE ACHIEVED THOSE PRIMARY OBJECTIVES BUT THE FRONT RUBBER CAN BE TRICKY TO GET IN THE TUBE.  IF THE INSIDE OF THE TUBE IS CLEANED AND SMOOTHED AND A LITTLE VASELINE OF RUBBER GREASE APPLIED IT IS POSSIBLE TO EITHER PULL THE RUBBER IN WITH A LONG BOLT OR PUSH IT IN WITH A WIDE VICE, FLYPRESS OR SIMILAR.  OF COURSE YOU MUST FEED IN THE EDGES OF THE RUBBER WHILST APPLYING PRESSURE. 
ALTERNATIVELY WE HAVE OUR VERSION OF THE ORIGINAL NORTON FITTING TOOL ON RGM063971.