CRANKSHAFT THRUST WASHER SHIM

THICKNESS: 0.006” (.15MM) CRANKSHAFT SHIM.
THIS SHIM FITS INTO THE CRANKCASES PRIOR TO FITTING THE BEARING.  IT IS USED TO REDUCE CRANKSHAFT END FLOAT.
CLEARLY IT WILL SLIGHTLY REDUCE THE BEARING ENGAGEMENT AND SO SHOULD PROBABLY NOT BE USED ON RACING OR HIGH PERFORMANCE ENGINES.
FOR THESE SEE 067569 AND 130001.  THESE SHIMS FIT BEHIND THE INNER PLATE OF THE BEARING ON THE CRANKSHAFT.
ALSO SEE PART NUMBER 067569, 130001 AND FOR SINGLE CYLINDER PLEASE SEE PART NUMBER A2/46