BOYER POWERBOX, THREE PHASE, REPLACES RECTIFIER AND ZENER DIODE

THREE PHASE POWER BOX WITH CHARGING LIGHT CONTROL, NEGATIVE EARTH ONLY.

KIT CONTENTS: POWERBOX, 4X FEMALE BULLET CONNECTORS, 4X MALE BULLET CONNECTORS, 1 EARTH EYE AND AN INSTRUCTION SHEET
INPUT: ANY PERMANENT MAGNET ALTERNATOR THREE PHASE, THREE WIRE UP TO 280 WATTS
OUTPUT: 13/14 VOLTS DC (CHARGING 12 VOLTS)
MOUNTING: 4 X 7MM HOLES AT 70MM X 70MM CENTRES
MOUNTING DETAILS: THIS CAN BE MOUNTED IN A BATTERY BOX BUT SOME AIR FOR COOLING IS REQUIRED
SIZE: 92MM LONG X 92MM WIDE X 73MM HIGH, 92MM X 54MM OVER MOUNTING FLANGE
WEIGHT: 500G

MOUNT THE UNIT IN FREE AIR, THIS CAN BE IN A BATTERY BOX BUT SOME AIR FOR COOLING IS REQUIRED.  USE RUBBER VIBRATION MOUNTINGS FOR SEVERE CONDITIONS.

NEVER CONNECT THE BATTERY THE WRONG WAY ROUND.  A FUSE MUST BE PLACED IN ONE OF THE BATTERY CONNECTIONS.  WHEN RUNNING WITHOUT A BATTERY NO FUSE IS REQUIRED AND IT IS IN ORDER TO SHORT THE OUTPUT TO STOP THE ENGINE.

THE CHARGING LAMP SHOULD NOT BE MORE THAN 10 WATTS.  THIS WILL NOT WORK WHEN RUNNING WITHOUT A BATTERY.