ST/STEEL REVERSE CONE MOUNTING PLATE SET (6) (BRUSHED FINISH)

REVERSE CONE MOUNTING PLATE SET WITH A BRUSHED FINISH.

CONTENTS
061720S        X2        MAIN SUPPORT BACK PLATE
061721S        X2        SILENCER MOUNT
061722S        X2        FOOTREST GUSSET

FITTING INSTRUCTIONS.
TAKE THE MEDIUM SIZE PLATE, GREASE THE BOLTS AND ATTACH LOOSELY TO THE SILENCER.

TAKE THE SMALL PLATE, GREASE THE BOLTS AND PLACE FLAT WASHER ON BOLTS, SLIDE BOLTS THROUGH THE TWO CLOSEST HOLES ON THE PLATE AND THEN THE END OF THE ZED PLATE.  THE FRONT EDGE OF THE PLATE WOULD BE MORE OR LESS VERTICAL.

PLACE THE BACK PLATE OVER THE BOLTS AND LOOSELY ADD WASHERS AND NUTS, SO LONG AS THE PILLION FOOTREST HOLES ARE MORE OR LESS ALIGNED (IT IS IMPOSSIBLE TO FIT THE BACK PLATE WRONGLY).  

LIGHTLY GREASE THE THREADS AND RUBBERS TO THE BACK PLATE (LOOSELY), OFFER UP THE SILENCER, MOVE, PULL, ADJUST PLATES TO GET A NICE NO STRAIN FIT.  IT MAY BE NECESSARY TO TWEAK THE PIPE SLIGHTLY AND IT MAY BE NECESSARY TO SLACKEN THE ZED PLATE MOUNTING BOLTS AFTER MUCH PULLING AND PUSHING ALL SHOULD LINE UP NICELY AND EVERYTHING CAN BE GRADUALLY TIGHTENED UP.