SINGLE CYLINDER CRANKCASE STUD, FIXED 5/16"

SINGLE CYLINDER CRANKCASE STUD, FIXED 5/16"

5/16" BSC BOTH ENDS, (ONE END IS TIGHTER TO REMAIN IN PLACE WHEN FITTED).  THIS STUD IS FITTED TO THE TIMING SIDE CRANKCASE JUST BELOW THE CYLINDER BARREL AND GENERALLY REMAINS IN PLACE.  USED ON MOST ROAD GOING SINGLES.  3" LONG, SUPPLIED WITH A .525 AF (1/4" WHIT) STAINLESS NUT AND HEAVY STAINLESS WASHER.  ALL STAINLESS STEEL.  ALL UK MADE.

NOTE
THE END OF THIS STUD THAT IS NOT FITTED WITH A NUT IS THE TIGHT END FOR THE CRANKCASE AND TWO NUTS LOCKED ONTO THE STUD WILL BE NEEDED TO SCREW THE STUD FULLY HOME.