RGM Motors Ltd - The UK's Premier Norton Specialist

My Account

My basket

0Items:

£0.00Total:

PAIR OF ELECTRONIC CLOCKS (SPEEDOMETER & TACHOMETER) WITH MOUNTS

Place your mouse over this image

PAIR OF ELECTRONIC CLOCKS (SPEEDOMETER & TACHOMETER) WITH MOUNTS

Part No
SM2804/5C
RGM Approved

PAIR OF ELECTRONIC CLOCKS (SPEEDOMETER & TACHOMETER) WITH MOUNTS

ELECTRONIC SPEEDOMETER & TACHOMETER SOLD AS A PAIR.

COMPLETE WITH A HIGHLY POLISHED ALUMINIUM SHORT STYLE (1967-1974) COMMANDO CLOCK HOUSING WITH A STAINLESS BASE TO TIDY THE WIRING AND LOCATE THE SPEEDOMETER FUNCTION SWITCH.

SM2804C - SPEEDOMETER

STATE OF THE ART SPEEDOMETER REQUIRING NO TRANSMISSION SENSOR, VERY EASY TO INSTALL, SATELLITE POSITIONING MAKES IT EXTREMELY ACCURATE AND HIGHLY FUNCTIONAL LCD DISPLAY, ODOMETER, RESETTABLE TRIP TOTAL MILEAGE, TRIP MILEAGE, 0-60MPH AND DISTANCE COVERED IN FEET, 1/4 MILE TIME AND TERMINAL SPEED, ELEVATION, COMPASS TO SHOW DIRECTION OF TRAVEL, ACCURATE G.P.S CLOCK, RECALL MAXIMUM SPEED DURING A RUN, AND OF COURSE DISPLAYS THE CURRENT SPEED, ALL WITH A TRADITIONAL APPEARANCE AND A NOD TOWARDS THE STYLE OF A CIRCA 1971-74 COMMANDO.

OVERALL DEPTH: 1 5/16" (33MM)
B
EZEL DIAMETER: 3 1/2" (90MM)
BODY DIAMETER: 3.220" (81.5MM)
USE ON: COMMANDOS, TWIN, SINGLES

SM2805C - TACHOMETER

STATE OF THE ART TACHOMETER, THE ONLY TACHOMETER TO CONNECT DIRECTLY TO ANY IGNITIONS WITHOUT REQUIRING ANY SPECIAL ADAPTERS MAKING INSTALLATION VERY SIMPLE, VERY ACCURATE, DIGITAL STEPPER MOTOR DESIGN, RACE PROVEN.

FEATURES INCLUDE PEAK MAXIMUM R.P.M, RECALL FULLY PROGRAMMABLE FROM 5-6 PULSES PER REV. TRADITIONAL APPEARANCE WITH A NOD TOWARDS THE STYLE OF A CIRCA 1971-74 COMMANDO.

OVERALL DEPTH: 1 5/16" (33MM)
BEZEL DIAMETER: 3 1/2" (90MM)
BODY DIAMETER: 3.220" (81.5MM)
USE ON: COMMANDOS, TWINS, SINGLES

KIT CONTAINS THE FOLLOWING:
SPEEDOMETER
TACHOMETER
POLISHED DIE CAST SHORT COMMANDO CLOCK HOLDER (2)
STAINLESS FINISHING PLATE (2)
LARGE WIRING GROMMET (2)
STAINLESS STEEL BUTTON HEAD SCREW (4)
STAINLESS STEEL SELF LOCK NUTS (4)
STAINLESS STEEL WASHERS (4)
TUBE OF CLEAR SILICON (1)

MOUNTING INSTRUCTIONS

THE CLOCK HOLDERS ARE STANDARD COMMANDO AND FIT ONTO THE FORK STANCHIONS AS STANDARD.
THE STAINLESS FINISHING PLATES ARE SCREWED ONTO THE BOTTOM MOUNTING EARS IN THE CLOCK HOLDER USING THE STAINLESS BUTTON HEADS AND NYLOCS.  LARGE WIRING GROMMET IS PLACED INTO THE HOLE IN THE STAINLESS PLATE, THE INSTRUMENT IS PLACED LOOSELY INTO THE CLOCK HOLDER AND WIRED UP IN ACCORDANCE TO THE INSTRUCTIONS ENCLOSED.  ONCE COMPLETED EXCESS WIRE IS RETAINED IN THE CLOCK HOLDER IN THE VOID BETWEEN THE GROMMET AND THE INSTRUMENT.  A SMALL BEAD OF THE CLEAR SILICON IS THEN APPLIED TO THE UNDERSIDE OF THE INSTRUMENTS RIM WHICH IS THEN ALIGNED AND PLACED IN POD. HAVE A SUITABLY HEAVY BOOK TO HAND TO WEIGH IT DOWN, LEAVE OVERNIGHT, REMOVE EXCESS SILICON ONCE SET.



Telephone orders

Orderline: +44 (0)1946 841517

Monday to Friday 9am - 5pm

Price in GBP
£519.00 excl. VAT
  • We're sorry but this item is temporarily unavailable. Order now and we will despatch the item immediately when it's back in stock.