BOYER POWERBOX,SINGLE PHASE, REPLACES ZENER DIODE, RECTIFIER & W/L ASSIMILATOR

SINGLE PHASE POWER BOX WITH CHARGING LIGHT CONTROL AND WIRING DIAGRAM.

INPUT: ANY PERMANENT MAGNET ALTERNATOR SINGLE PHASE TWO OR THREE WIRE UP TO 180 WATTS.
OUTPUT: 13/14 VOLTS DC (CHARGING 12 VOLTS)
MOUNTING: 4 X 6MM HOLES AT 45MM X 75MM CENTRES
SIZE: 66MM LONG X 62MM WIDE X 35MM HIGH, 92MM X 66MM OVER MOUNTING FLANGE
WEIGHT: 200G
CAN BE USED ON BOTH POS/NEG EARTH MACHINES 

MOUNT THE UNIT IN FREE AIR, THIS CAN BE IN A BATTERY BOX BUT SOME AIR FOR COOLING IS REQUIRED.
USE RUBBER VIBRATION MOUNTINGS FOR SEVERE CONDITIONS.
NEVER CONNECT THE BATTERY THE WRONG WAY ROUND.  A FUSE MUST BE PLACED IN ONE OF THE BATTERY CONNECTIONS.  WHEN RUNNING WITHOUT A BATTERY NO FUSE IS REQUIRED AND IT IS IN ORDER TO SHORT THE OUTPUT TO STOP THE ENGINE.
THE CHARGING LAMP SHOULD NOT BE MORE THAN 10 WATTS.  THIS WILL NOT WORK WHEN RUNNING WITHOUT A BATTERY.