BOYER POWERBOX REPLACES ZENER DIODE AND RECTIFIER FOR THREE PHASE ALTERNATOR

SPEC AS FOLLOWS:

3 PHASE 12V UPTO 280 WATTS POSITIVE OR NEGATIVE EARTH

KIT CONTENTS: POWERBOX, 4X FEMALE BULLET CONNECTORS, 4X MALE BULLET CONNECTORS, 1 EARTH EYE AND AN INSTRUCTION SHEET

INPUT: ANY PERMANENT MAGNET ALTERNATOR THREE PHASE, THREE WIRE UP TO 280 WATTS.

OUTPUT: 13/14 VOLTS DC (CHARGING 12 VOLTS)

MOUNTING: 4 X 7MM HOLES AT 70MM X 70MM CENTRES

MOUNTING DETAILS: MOUNT THIS UNIT IN FREE AIR.  THIS CAN BE IN A BATTERY BOX BUT SOME AIR FOR COOLING IS REQUIRED

SIZE: 88MM LONG X 90MM WIDE X 64MM HIGH, 88MM X 50MM OVER MOUNTING FLANGE

WEIGHT: 360G

MOUNT THE UNIT IN FREE AIR, THIS CAN BE IN A BATTERY BOX BUT SOME AIR FOR COOLING IS REQUIRED.  

USE RUBBER VIBRATION MOUNTINGS FOR SEVERE CONDITIONS.

NEVER CONNECT THE BATTERY THE WRONG WAY ROUND.  A FUSE MUST BE PLACED IN ONE OF THE BATTERY CONNECTIONS.  WHEN RUNNING WITHOUT A BATTERY NO FUSE IS REQUIRED AND IT IS IN ORDER TO SHORT THE OUTPUT TO STOP THE ENGINE.