3/8" X 4.9" ENGINE MOUNTING STUD

CNC TURNED, UK MADE, STAINLESS STEEL 3/8" (9.5MM) STUD.  4.9" (125MM) LONG WITH 9/16" (15MM), 26 TPI THREAD ON EACH END.  THIS STUD WAS ORIGINALLY USED ON THE TWIN CYLINDER FEATHERBEDS ON THE BOTTOM FRONT MOUNT WHERE THE STUD PASSES THROUGH A BRACKET ON THE FRAME AT EACH SIDE.  (TYPICALLY SLIMLINES).  IF THE STUD ONLY PASSED THROUGH THE ENGINE AND ENGINE PLATES (NOT FRAME) STUD 067527 WOULD BE USED.

THE NUTS USED ON THESE STUDS CAN BE EITHER E3224A (1/4" WIDE) OR 18942 (5/16" WIDE), THEREBY GIVING AN ADJUSTMENT OF THE EFFECTIVE LENGTH.